Hand tap sets for threading hardened steels up to 1,300 N/mm²
Designed for specific applications requiring high resistance to wear and abrasion.
Post-production heat treatment of components is increasingly being replaced by the use of pre-hardened and treated materials. This requires machining, milling, drilling and threading very hard materials while ensuring that components, moulds or dies will not subsequently deform, as no further heat treatment is required.
Special alloy materials have also appeared on the market which, due to their composition and supplied condition, already offer very high hardness and wear resistance. These materials have been designed for components or products subjected to severe wear, examples including the HARDOX and WELDOX ranges.
A first important group of these materials consists of steels that have been pre-hardened at source and are supplied with tensile strengths ranging from 1,000 to 1,300 N/mm².
The second group includes threading or re-threading processes on heat-treated steels, where hardness may range from 40 to 55 HRC and, in other cases, from 53 to 63 HRC.
There is also a group of highly wear-resistant materials whose hardness varies according to type, but which share the common characteristics of high hardness and specific alloy compositions that resist wear and consequently make machining more difficult.
For threading hardened steels, FERG has developed a comprehensive range of taps covering current market requirements.
VG group taps: For threading treated steels and heat-resistant steels with a tensile strength of 1,000 N/mm².
Hand threading set references: T-108, A-108.
Machine taps for blind holes: 182A, T-182A, A-182A.
Machine taps for through holes: 184A, T-184A, A-184A.
HR group taps: For threading treated steels and heat-resistant steels with very high tensile strength from 1,000 to 1,300 N/mm².
Hand threading set reference: A-648.
Machine taps for blind holes: 642A, A-642A.
Machine taps for through holes: 641A, A-641A.
Machine taps for tapered threads, NPT, RC: A-645.
HR+ group taps: For threading treated steels with hardnesses of 40 to 55 HRC and steels from 53 to 63 HRC.
Powder metallurgy high-speed steel taps for hand or machine threading, 40 to 55 HRC: A-655A.
Micrograin tungsten carbide taps for hand or machine threading, 53 to 63 HRC: A-765A.
These different tool ranges are used across a wide variety of manufacturing sectors in applications such as stamping and forming dies, aluminium injection moulds, plastic moulds, wear-resistant plates for loading and lifting equipment, and industrial vehicle bodies.
FERG's standard range covers a wide variety of materials and hardness levels. We also develop special applications, adaptations and custom solutions that enable us to tailor our tools to the requirements and changing needs of the market.